SMARTFIRE FLOW CONTROL AND MEASUREMENT SYSTEM, Ignitors and Flamerods, Oil Supply Units, High Pressure Blowers, MANUAL RESET SHUT OFF VALVES, Manufacturers, Exporters and Suppliers Marketplace

Company Name	Perfect Combustion Sdn. Bhd.
Address	No. 60, Jalan Tanming 7, Tanming Jaya Industrial Park, Off Jalan Balakong, 43300 Seri Kembangan, Selangor Darul Ehsan.
Description	Established in 1997 & has more than 10 years' experience in industrial burner, packaged burner & heating system such as boiler, furnace & incinerator & burner conversion project. We are an engineering, marketing & servicing company & are highly regarded & value by those that it serves as problem solver who provide one stop solution to the customers. The company design, supply, install & commissioning oil & gas combustion system & heat generating equipment in Malaysia & South East Asia.
URL	http://www.daganghalal.com/perfectcombustion
Contact Person	Mr William Ng
Telephone	03 - 8961 9484 / 86
Fax	03 - 8961 9485
Country	Malaysia

SMARTFIRE FLOW CONTROL AND MEASUREMENT SYSTEM

Product Description :
Low NOx burner.

Detail Description :
• Precise electronic control of air and fuel flow to the burner.
• Maintain emissions or fuel efficiency over the entire operating range of the burner.
• Automatically compensates for changes in combustion or process conditions.
• Plug 'n' Play, turnkey system.
• Integrates easily with all burner management systems.
• Advanced diagnostics and troubleshooting.
• Optional remote monitoring gateway.
• Rugged industrial design.
• Redundant system safety checks built into intelligent components.
• FM and CSA approved.
• Meets requirements for European Electromagnetic Compatibility (EMC) and Low Voltage Directives.

Ignitors and Flamerods

Product Description :
Accessories.

Detail Description :
PERFECT ingnitors and flame rods are engineered specifically for your burner products. Quality construction provides maximum service life and dependable operation to keep your heating processes running smoothly. In addition to replacements, consider keeping spares on hand for all your heating needs.

Oil Supply Units

Product Description :
Accessories.

Detail Description :
• Prepiped, Pretested and Compact.
• Skid-mounted.
• 3 Sizes: to 600 GPH #2 Oil.
• Discharge Pressures to 130 PSIG.
• For any Distillate Oil of 32 - 100 SSU Viscosity.

High Pressure Blowers

Product Description :
Blower Accessories.

Detail Description :
• 31 Sizes.
• Air Flows: to 5,375 cfm.
• Pressures: 12, 16, 20, 24 OSI.
• High-Efficiency Involute Scroll Design.
• Ambient Temperature Limit: 140°F (60°C).
• Lightweight Fiberglass-Reinforced Plastic Case.

MANUAL RESET SHUT OFF VALVES

Product Description :
This solenoid valve is made to guarantee the gas interception either for gas detector signals (methane, lpg, carbon monoxide and so on) and safety thermostats, or for an electric black out.

In order to be more reliable this solenoid valve can be reset only when electrically supplied and only if the gas detector doesn't send any danger signal.

Simply powering the coil does not open the valve. The reset mechanism has to be operated by hand.

EC certified according to EN 161.

In conformity with the 2009/ 142/ EC Directive (Gas Directive).

6 bar versions in conformity with the 97/ 23/ EC Directive (PED Directive).

In conformity with the 94/ 9/ EC Directive (ATEX Directive).

In conformity with the 2004/ 108/ EC Directive (Electromagnetic Compatibility).

In conformity with the 2006/ 95/ EC Directive (Low Voltage).

Detail Description :
TECHNICAL DATA

• Use: Not aggressive gases of the 3 families (dry gases).
• Threaded connections Rp (brass body): (DN 15÷DN 25) according to EN 10226.
• Threaded connections Rp: (DN 20÷DN 50) according to EN 10226.
• Flanged connections PN 16: (DN 65÷DN 300) according to ISO 7005.
• On request ANSI 150 flanged connections.
• Power supply voltage: 12 Vdc, 12 V/ 50 Hz, 24 Vdc, 24 V/ 50 Hz, 110 V/ 50 Hz, 230 V/ 50-60 Hz.
• Power supply voltage tolerance: -15% ... +10%.
• Max. working pressure: 500 mbar or 6 bar.
• Environment temperature: -20÷+50°C.
• Protection degree: IP65.
• Class: A.
• Group: 2.
• Closing time: <1 s.
• Filtration: 50 µm (on request other filtration qualities).
• Filtration class: G 2 (acording to EN 779).

MATERIALS

• Die-cast aluminium (UNI EN 1706).
• OT-58 brass (UNI EN 12164).
• 11S aluminium (UNI 9002-5).
• Galvanized and 430 F stainless steel (UNI EN 10088).
• NBR rubber (UNI 7702).
• Viledon.

Page 8 of 10, << Previous 1 2 3 4 5 6 7 8 9 10 Next >>

Latest Merchant

Featured Advertisements